" "
Facebook0
Pinterest0
Pinterest
fb-share-icon
Instagram0

Guidelines For Cleaning Hardwood Floors After Sanding

by | Aug 3, 2022 | floor sanding | 0 comments

You probably spend a lot of time on your hardwood floors, like most homeowners. However, as with any type of flooring, it’s important to take care of them in order to keep them looking their best. To make the sanded floors look fabulous, it is equally essential to use a professional cleaning product. If you have just finished floor sanding in North Shore, Sydney, it is important to follow these guidelines to clean them properly

Method 1:

1. Wash The Floors With A Standard Cleaning Product

After floor sanding in North Shore, Sydney, it is important to clean the floors with a standard cleaning product. This will remove any dust and debris that was left behind. Use a mop or bucket filled with hot water and detergent.

2. Scrub The Floor To Remove Stubborn Debris

Once the floors are wet, use a scrub brush to scrub the floor. If there is stubborn debris that won’t come off with soap and water, you can try using an enzyme cleaner or turpentine.

3. Rinse The Floors And Dry Them Out

Rinse the floors and then allow them to dry completely before moving on to the next step. This will help avoid water spots and other damage.

4. Seal The Floors With A Protectant

After the floors have dried, it is important to seal them with a protectant to prevent water from damaging them again. Use a product that contains ULV or UV protection.

5. Finish With A Final Polish

After the protectant has been applied, you can finish the floor with a final polish to make it look shiny and beautiful.

6. Enjoy Your Clean, Sanded Floors!

Now your floor sanding look great in North Shore, Sydney and you didn’t have to spend a fortune on professional cleaning products. Finally, you can enjoy your clean, sanded floors!

Method 2:

1. Use A Vaccum

The first thing you should do is vacuum off any dust that you can see with a vacuum cleaner. Start by vacuuming up as much of the area as possible into a mound.

2. Use A Damp Rag

A moist rag or swifter works best for removing any remaining dust. To remove the dust from the floor sanding, all you have to do is wipe in one direction. It is advantageous to have a laundry or rubbish basket handy for disposal.

3. Use A Wood Cleaner

If you decide to use a professional wood floor cleaner, ensure sure it is free of any oils or polishes that can affect the adherence of any topcoat that will be used after for restoration. Whatever cleaning solution is selected, begin by mopping in the direction of the wood planks. A more thorough cleaning may be used to complete the task. Move across the boards and with the grain to remove any remaining dirt from the cracks.

4. Use An Enzyme Cleaner Or Turpentine

If the flooring is particularly dirty or caked with dust, you may need to employ an enzyme cleaner or turpentine to loosen and remove the dirt. Be very careful when using these cleaners as they can be hazardous if not used properly.

These are the methods that should be used for cleaning floor sanding in North Shore, Sydney. As with most things, there are a variety of ways to clean them and the best way to determine what will work best for your floor is to try a few different methods until you find one that works well with your particular floor and furniture.

Our Categories

Recent Comments

    0 Comments

    Submit a Comment

    Your email address will not be published. Required fields are marked *